Fab- Eq.

High volume out-put equipment

3-HOLE TEMPLATE JIG: $32.99

Top of page

Under $1,000

DuraShutter®

3 HOLE BORE fixture with EURO hinge INSERT Ram attachment: $195.00 Hinge hole drilling PicturesOptional equipment for higher volume operations. When on a budget we recommend starting with the basics, then consider buying labor reduction options after sales volume is more than 1500 sq. ft. of shutter per month.

SAVE TIME & MONEY! DuraShutter’s Standard Brand offers the world fastest shutter hinging system. Fixture drills 3 holes at the same time, then press-fits Euro hinge at the same station using a low cost ‘store bought’ drill press.

A highly precise custom miter saw with a rotating table, for cutting frames. Features included. Right and left support arms, pneumatic material clamping system, base cabinet with dust collector, molding stop, quick adjust rotating table. Cutting capacity up to 4 1/8" wide. Pneumatic Clamping The pneumatic clamping system was especially developed for cutting aluminum and wood profiles, for best quality and operator safety. The clamping devices are operated automatically by a sensor at the start of the blade descent. Very cool. The exhaust cabinet was developed to collect the dust during the cutting of the profile - the cabinet doubles as a work table. The exhaust cabinet in addition to being used as a work table for the miter saw. The extension arms, and pneumatic clamps also attach to the cabinet. It has a centrifugal exhaust that its possible to switch the cabinet on or off independent of the saw. The molding stop was developed to attach on the right and left extension offering precision and accuracy on the calibrated scale, allowing the operator obtain the same measure.

Miter Saw System is manufactured specifically for framers. The single piece custom extruded aluminum base provides the rigidity needed to assure a true and accurate miter for every cut. The miter scales are silk screened clear and easy to read. Guaranteed for 30 years (really a lifetime). Systems are available in 7 and 11 foot models. The system uses a one piece, heavy gauge aluminum extrusion, that mounts to the top of the saw table ~ has solved the problem inherent in competitive systems where the scales are extension arms that need to be attached with brackets to the sides of the saw. Obviously, any joint is a weak point and these extensions frequently lose their levelness and alignment. Two adjustable clamp assemblies adjust up and down ~ the channel design of the base allows them to move side to side.

1650-5/8” V-Nails $9.95 The Im-2 will accommodate molding slightly wider than 4 1/2 inches and slightly taller than 4 1/2 inches. The table surface is 10 x 10 inches. It is 14 1/2" from the v-nail insertion point to the end of the wing. Buy Direct-Framingsupplies.com 1-800-334-9060 $570. Plus .1/4 cents per nail

Hoffman Key Cutter Hoffmann Dovetail Routing Machines: MU-C Output is approx. 16 routing strokes per minute, which translates into 2 completely processed rectangular frames.

$1,100. Plus 6 cents per key